2000 Watt Missouri Freedom II™ 9 Blade Wind Turbine Generator

Missouri Freedom II™ 9 Blade Wind Turbine Generator PMG
Click to enlarge
Price: $759.00
Product ID : freewind_ii_9
Manufacturer: Missouri Wind and Solar
Weight: 55.00 lbs
E-mail to a friend | Add To Wish List

Purchase

12/24 Volts
24/48 Volts
48/96 Volts

Description

Missouri Freedom II™ 2000 watts max 9 Blade wind turbine - This is a high amp model.

Our Missouri Freedom Wind Turbines are hot dipped galvanized with zinc plated hubs!

Will not rust
No need for painting or special coating for up to 50 years under normal conditions



Missouri Freedom Galvanized Wind Turbine


The Missouri Freedom™ series of wind turbines feature the newest innovation in residential wind power.  The permanent magnet generator has a 28 magnet rotor inside and our skewed stator core for easy turning – up to 2000 watts max output! 

How easily does it turn?  What about cogging?  The Missouri Freedom II Wind Turbines™ have a cut-in wind speed of 6 MPH and NO COGGING!

  • 12/24 volt can be wired for 12 or 24 volts
    • You can wire it in series for 24 volt operation and charge 12 or 24 volt battery banks. 
  • 24/48 volt can be wired for 24 or 48 volts
    • You can wire it in series for 48 volt operation and charge 24 or 48 volt battery banks. 
  • 48/96 volt can be wired for 48 or 96 volts
    • You can wire it in series for 96 volt operation and charge 48 or 96 volt battery banks. 

This unit comes with:  

  • Freedom ll PMG ( PERMANENT MAGNET GENERATOR ) WITH 28 MAGNET ROTOR.
    • Freedom ll PMG has no brushes, very dependable!  
    • 125,000 hours + of rated bearing life.
  • Two heavy duty bridge rectifiers for converting 3 phase to dc output. 
  • Mounting Bracket and Heavy Duty 2 arms tail assembly.
  • Tail fin measures 29" tall for maximum tracking. 
  • No slip rings to fail or replace. Wire tension system.
  • Comes with 9 Raptor Generation 4 nylon carbon fiber composite blades. 
    • Aerodynamically tapered Genuine RAPTOR GENERATION 4 Blades ™ for maximum output.
    • Blades Make 62 1/2" dia. swept area
  • Steel blade hub is 1/4'' thick x 9'' in diameter
  • Mounting Bracket Fits on 1.5" schedule #40 or #80 pipe.
  • Heavy duty Hub spacer/stabilizer 
  • 3 YEAR Limited WARRANTY
  • Turbine Weight: 50 pounds
  • Shipping Weight: 55 pounds
  • Shipping Dimensions: 30" x 10" x 8"
  • HEAVY DUTY MACHINES BUILT TO LAST A LIFE TIME

Missouri Wind and Solar FREEDOM II PMG™ (permanent magnet generator) - our newest innovation in power generation! 

Our Freedom II PMG™ permanent magnet generator is specifically designed for wind turbine use and can even be used with vertical axis wind turbines (VAWT).  

This Freedom II™ permanent magnet generator works best with our 9 Blade Raptor Generation 4™ blades and hub or our new Falcon Mach 4 80" 3 blade set.

Why buy a Freedom or Freedom II PMG™ over a Delco car alternator PMA?

The answer is simply more copper!  More copper equals more power - each Freedom PMG™ rotor contains twice as much copper than any Delco style PMA.

PMG Features: 

  • NO COGGING - CUT-IN SPEED IS 6 MPH
  • 17 mm Stainless steel shaft compatible with all Missouri Wind and Solar hubs
  • Polished aluminum case
  • Zinc plated 28 magnet rotor and skewed stator core
  • For charging 12, 24, or 48 volt battery banks
  • Specifically designed for wind turbines.
  • MANUFACTURED IN THE USA ONLY BY MISSOURI WIND AND SOLAR!

PMG Specifications:

  • 3/8" diameter bolt holes
  • 1 15/16" on center between mounting holes
  • 5 7/8" OD width
  • 6 5/16" tall
  • 9 1/2" overall length

(Can be used as 3 phase output or DC output / Grid tie or battery charging)

3 phase output is the most efficient, no voltage and amperage loss in long runs like DC suffers from. DC output requires heavy expensive cable and has a high power loss over long runs. Straight DC output is now just simply old technology. If you are replacing a DC output model you can just mount the two included bridge rectifiers at the top of the tower for the same run of wire as your DC model if you wish.

The bridge rectifier converts the long run of efficient 3 phase into dc next your charge controller, batteries, or grid tie inverter. The 3 phase output can be used direct to some equipment like 3 phase grid tie inverters as well. Either way you use it this is a very versatile output wind turbine.

 

Missouri Wind Freedom II PMG

Product Reviews

Login or Register to write the first review.

Products You May Like

1600 Watt Missouri Freedom™ 5 Blade Wind Turbine Generator
Our newest wind turbine in a 5 blade model
$349.98
2000 Watt 7 Blade Missouri General™ Freedom II Wind Turbine
Our newest wind turbine in a 7 blade model
$699.00
2000 Watt Missouri Freedom II™ 7 Blade Wind Turbine Generator
Our newest wind turbine in a 7 blade model
$699.00
1600 Watt Missouri Freedom™ 9 Blade Wind Turbine Generator
Our newest wind turbine in a 9 blade model
$389.98
2000 Watt 9 Blade Missouri General™ Freedom II Wind Turbine
Our newest wind turbine in a 9 blade model
$759.00